FISCHER 390 S EPOXY 390ml + NOZZLE
1. Product Overview
Fischer SB 390 S is a two-component, styrene-based vinylester injection mortar formulated for general-purpose anchoring in concrete and masonry. The product is ideal for indoor and outdoor applications requiring medium performance and quick setting in a wide range of base materials. Packaged in a 390 ml coaxial cartridge, SB 390 S offers a reliable and economical solution for construction professionals.
2. Applications
- Fixing of threaded rods, bolts, and reinforcing bars
- Anchoring in solid brick, concrete, hollow block, and stone
- Ideal for balustrades, brackets, piping, fencing, and signage
- Suitable for overhead and horizontal applications
- Temporary or permanent structural attachments
3. Key Features
- Fast curing times for rapid installation
- Excellent bond strength in concrete and masonry
- Economical formulation for everyday anchoring
- Works in dry and damp holes
- Suitable for hollow substrates with sleeves
- Compatible with standard caulking guns using a static mixer
- Shelf stable with proper storage
4. Technical Specifications
|
Property |
Details |
|
Resin Type |
Vinylester with styrene |
|
Colour |
Light grey |
|
Packaging |
390 ml cartridge |
|
Mixing Ratio |
10:1 via static mixer |
|
Installation Temp |
+5°C to +35°C |
|
Service Temp |
-5°C to +40°C |
|
Work Time (20°C) |
~5–6 minutes |
|
Full Cure Time (20°C) |
~30–45 minutes |
|
Compressive Strength |
~60 MPa |
|
Pull-Out Strength (C20/25 concrete) |
Up to 10 kN (depending on embedment) |
|
Shelf Life |
12 months (cool, dry storage) |
5. Installation Instructions
- Drill hole to recommended diameter and depth.
- Clean hole using a blow pump and steel brush.
- Repeat cleaning process: blow, brush, blow.
- Cut cartridge seal and attach static mixer nozzle.
- Dispense a small amount (first 10 cm) to waste.
- Inject mortar from bottom up, filling ~2/3 of the hole.
- Insert threaded rod or rebar while turning slightly.
- Allow to cure before applying loads based on temperature.
6. Typical Load Values (Indicative Only)
|
Rod Size |
Embedment Depth |
Pull-Out Strength (C20/25) |
|
M8 |
80 mm |
5.0–6.0 kN |
|
M10 |
90 mm |
7.0–8.0 kN |
|
M12 |
110 mm |
9.0–10.5 kN |
Final load capacities depend on substrate, embedment, and curing.
7. Accessories & Tools
- Fischer FIS A threaded rods
- Fischer sleeves for hollow substrates
- Static mixing nozzle (included)
- Compatible caulking or dispenser gun
- Hole brushes and cleaning pumps
8. Storage & Safety
- Store between +5°C and +25°C
- Protect from direct sunlight and frost
- Use PPE during application – gloves, mask, goggles
- Refer to Safety Data Sheet (SDS) for detailed handling guidelines
9. Environmental & Safety Compliance
- Contains styrene – use with adequate ventilation
- Not recommended for use in sensitive indoor areas (low VOC zones)
- Dispose of in accordance with local environmental regulations
Click here for BPIR Sheets
